Complete Haggy Drive System All terrain version that includes a complete set of our Bergmeister All-terrain 150mm wheels that come in different color options for the hub. Everything you need for your electric skateboard. Just add your ESCs, remote control and battery pack and you are ready to go.
The Haggy Drive System is a dual rear mount setup on extra wide forged and precision milled trucks with 50-degree baseplates. Two custom-built high powered & water resistant 6374 – 190kv or 170kv (actual value can be slightly lower) sensored motors deliver massive amounts of power to the wheels.
The 60T drive gears are specifically made to fit the Bergmeister All-terrain wheels.
The motors work with max. 12s batteries. You will void your motor’s warranty if you take apart the motor yourself. Prior to every skate session, please double-check that all screws, nuts and bolts are tight. The set comes fully pre-assembled.
Please note: the perception of color is different depending on the lighting conditions. Pictures of rims taken indoors may look differently outdoors.
• 2x 3550W motors – 190kv or 170kv – 6374 format - 790g – 1.74lbs per motor
• Suitable for 8s-12s setups
• 5.5mm gold connector (phase) & JST-PH-2.0mm 6pin (sensor) connector incl. temperature sensor
Pulleys, Drive Gears and Belts:
• Screw-less 60T HTD-5mm single flange drive gear, made of black colored nylon – glass fiber composite material incl. 6001 type ball bearing
• 15T HTD-5mm single flange steel motor pulleys
• HTD-5mm pitch – 15mm width – 365mm (All-terrain) length timing belt
Trucks & Motor Mounts:
• Truck width incl. axles: 340mm - 13.39in
• Hanger width: 210mm - 8.27in
• Axle length outside of the hanger: 63mm - 10mm thread length - 34mm usable axle length
• Axle only requires 1 x axle washer + 1x 10mm bearing spacer (all included) with regular longboard wheels basis 608 standard bearing size
• Forged and precision milled aluminum hanger, die-cast 50-degree base plate with 92a barrel bushings
• Black plated CNC milled aluminum motor plate and motor mount. Fully adjustable and can be freely rotated to face front or rear
• CNC milled Bergmeister All-terrain 150mm wheels
• 1x set of Kahua trucks (front & back) with dual motor mounts incl. all hardware and bushings
• 1x set of silicone risers (5mm thick) incl. baseplate hardware
• 2x 6374 190kv or 170kv brushless outrunner motors incl. 2x 15T steel motor pulleys
• 1x set of complete Bergmeister All-terrain 150mm wheels incl. 608 type bearings, bearing spacers & washers
• 2x 60T Bergmeister All-terrain drive gears incl. 6001 type bearing
• 2x HTD 5-365mm long - 15mm wide timing belts
The shipping rate is calculated by adding the weight (incl. packaging) for each product in the cart. The total weight will then be used as a basis to obtain the final shipping costs.
The weight (incl. packaging) for this item is: 8.74 kg