Complete Haggy Drive System STREET version that includes a complete set of Señor Pepe 90mm wheels. Everything you need for your electric skateboard. Just add your ESCs, remote control and battery pack and you are ready to go.
The Haggy Drive System is a dual rear mount setup on extra wide forged and precision milled trucks with 50-degree baseplates. Two custom-built high powered & water resistant 6374 – 190kv or 170kv (actual value can be slightly lower) sensored motors deliver massive amounts of power to the wheels.
The 36T drive gears that come with this setup are fully compatible with other wheels that feature the center-set Kegel core. This setup also works with our Bergmeister All-terrain wheels. Components for the all-terrain version are sold separately or you can get the two-in-one Haggy Drive System, which already includes both setups (Street) and (All-terrain).
The motors work with max. 12s batteries. You will void your motor’s warranty if you take apart the motor yourself. Prior to every skate session, please double-check that all screws, nuts and bolts are tight. The set comes fully pre-assembled.
• 2x 3550W motors – 190kv or 170kv – 6374 format - 790g – 1.74lbs per motor
• Suitable for 8s-12s setups
• 5.5mm gold connector (phase) & JST-PH-2.0mm 6pin (sensor) connector incl. temperature sensor
Pulleys, Drive Gears and Belts:
• Screw-less 36T HTD-5mm single flange drive gear, made of black colored nylon – glass fiber composite material incl. 6001 type ball bearing
• 15T HTD-5mm single flange steel motor pulleys
• HTD-5mm pitch – 15mm width – 295mm length timing belt
Trucks & Motor Mounts:
• Truck width incl. axles: 340mm - 13.39in
• Hanger width: 210mm - 8.27in
• Axle length outside of the hanger: 63mm - 10mm thread length - 34mm usable axle length
• Axle only requires 1 x axle washer + 1x 10mm bearing spacer (all included) with regular longboard wheels basis 608 standard bearing size
• Forged and precision milled aluminum hanger, die-cast 50-degree base plate with 92a barrel bushings
• Black plated CNC milled aluminum motor plate and motor mount. Fully adjustable and can be freely rotated to face front or rear
• Señor Pepe 90mm - 78a wheels made by Labeda in California
• 1x set of Kahua trucks (front & back) with dual motor mounts incl. all hardware and bushings
• 1x set of silicone risers (5mm thick) incl. baseplate hardware
• 2x 6374 190kv or 170kv brushless outrunner motors incl. 2x 15T steel motor pulleys
• 1x set of Señor Pepe 90mm wheels incl. 608 type bearings, bearing spacers & washers
• 2x 36T Señor Pepe 90mm (Kegel compatible) drive gears incl. 6001 type bearing
• 2x HTD 5-295mm long - 15mm wide timing belts
The shipping rate is calculated by adding the weight (incl. packaging) for each product in the cart. The total weight will then be used as a basis to obtain the final shipping costs.
The weight (incl. packaging) for this item is: 6.9 kg